Hallo Zusammen,
und vielen Dank, dass Ihr mein Thread liest. Ich bin ganz neu hier und gleich mit einen Anliegen Entschuldigt dies bitte. Ich habe mich schon mit meinen Problem an Bethesda gewendet, dort konnte man mir aber noch nicht helfen, deswegen frage ich hier mal nach.
Ich spiele Fallout 4 über Steam auf meinen PC unter Windows 8.1.
Zusätzlich habe ich auf meinen Smartphone (Samsung Galaxy S4, Android) die "Fallout Pip-Boy-App" von Bethesda installiert.
Mein Rechner, auf dem ich Fallout 4 spiele, ist per Netzwerkkabel direkt mit meinen Router (Hitron Technologies, CVE-30360) verbunden, das Smartphone via WLAN.
Ich starte dann Steam und dann das Spiel, lade aber noch keinen Spielstand, sondern bleibe im Hauptmenü. Dann öffne ich die App auf dem Smartphone und ich kann die Plattform auswählen:
Hier klicke ich "PC" an und die App findet auch meinen Rechner sofort:
Die dort angezeigte IP-Adresse ist die Adresse von meinenRechner.
Hier klickeich dann die o. g. IP-Adresse an und es erscheint die Meldung, dass es geklappt hat:
Sofort darauf erscheint dann die Meldung, dass noch kein Spiel geladen ist:
Dann öffne ich ein Spielstand und während das Spiel lädt, ist alles ok, aber in der Sekunde, in der das Spiel geladen wurde, wird die Verbindung unterbrochen:
Ich habe natürlich versucht, zuerst ein Spielstand zu laden und dann die App zu öffnen, dann kommt aber nach der Erfolgsmeldung (siehe Bild 3) sofort die Fehlermeldung (siehe Bild 4).
Ich nutze nur die Windows-Firewall und AVG Antivirus. In der Firewall hat Fallout 4 alleRechte:
Ich selbst habe schon folgende Tipp aus dem Internet probiert:
Note: Be careful when doing this, you can easily fuck things upif you don't know what you're doing.
Alright some people have been asking for a nice step by step. Sohere you have it! This is implying windows 10, windows 7/8/8.1 should beextremely identical. To note, this is from my iPhone to my wired ethernet PC
Step 1: Hit The windows key, and type in "windowsfirewall", you should get something that pops up like this bad boy andhit enter
Step 2: On the window that pops up, click on advanced settings on the left hand side.
Step 3: On the new window that pops up, click on "Inboundrules" on the left, and then "New rule" on the right pretty picture of what you should be looking at
Step 4: Click on the portradio button and then next
Step 5: Ensure the TCP radio button is ticked and type in 27000into the text box. And click next a few times (ensuring that you ALLOW this rule on thefollowing prompts), name the rule whatever you want.
Step 6: Repeat steps 3-5 again, except on step 5 ensure UDP isticked, and then type in "28000" into the box.
Step 7 (May be optional for most): If you've got a locked downsystem, you may need to repeat the same steps just under "Outboundrules" on the left.
This isn't the most secure way, but without going intohow to assign static IP addresses and what not, this should get you good. Letme know if you have any questions.
Hier dervollständige Link:
https://www.reddit.com/r/fo4/c…nection_no_devices_found/
Kann mir jemand helfen?